Beacon Patch Attach 1 fl oz

Size : 1 fl oz (33.3ml)

Item Number : BA-PAIC

Patch Attach is a quick attach for any patch. Patch Attach is the only truly dry cleanable glue for patches.

Patch backs come in different forms: plain fabric, plastic coated with an exposed embroidered edge, and a completely coated plastic back with no exposed embroidery.

DIRECTIONS:
Patches with Exposed Fabric:
1. If possible, pre-wash fabric or garment to remove sizing.
2. Apply Patch Attach along the edge of the entire patch back.
3. Let glue dry for 10 minutes.
4. Position patch on garment. Cover with press cloth to avoid scorching.
5. Press with dry iron on cotton setting (no steam) for 60 seconds.
6. If possible, iron on reverse side for an additional 30 seconds.
Patches with Plastic Backs and No Exposed Fabric:
1. With a sharp knife or razor, score the plastic backing to expose fibers underneath at the patch edge around the entire patch. Be careful not to cut through the patch!
2. If possible, pre-wash fabric or garment to remove sizing.
3. Apply Patch Attach along the edge of the entire patch back.
4. Let glue dry for 10 minutes.
5. Position patch on garment. Cover with press cloth to avoid scorching.
6. Press with dry iron on cotton setting (no steam) for 60 seconds.
7. If possible, iron on reverse side for an additional 30 seconds.

Materials It Bonds:

Backpacks, Hats, Patches (Best on patches with exposed fabric back)

Features:

Permanent, Dries Clear, Non-Toxic, Washable, Water proof, Dry Cleanable, UVA Resistant

Cure Time:

24 Hours

Helpful Hints:

To Increase Product Effectiveness: Apply Patch Attach along the edge of the entire patch back. Position patch on garment. Cover with press cloth to avoid scorching.

To Remove: Patch Attach can be washed off with water before ironing, even if it’s dry Patches can be removed from garments by re-heating the patch from the back with an iron on cotton setting for 15-30 seconds. Use press cloth. Once ironed, there is no way to remove the glue from the fabric.